Ultronic

  • Under 12 second hand drying time
  • Quiet operation
  • Hygienic touch-free operation
  • Plastic or brushed stainless steel casing
  • HEPA filtration for room sanitation
Ask Quick Question

Product Overview

This high-quality, electric high-speed hand dryer is distinguished by its particularly short drying time. The appliance dries hands by removing the moisture with a concentrated jet of air. The hand dryer is ideally suited to the special demands made on washroom facilities in restaurants, commerce and public buildings.

Product Details

The efficiency of the Ultronic hand dryer makes drying your hands an easy and hygienic process. The switchable heating element allows for maximum comfort and can also be switched off to enable 'silent mode' which is ideal for sanitary rooms in schools, offices, and public buildings.

As bacteria is more likely to be spread from wet skin than it is from dry skin, hand drying is an essential part of the hand washing process. Say goodbye to bacteria, dust, and viruses with a HEPA-grade filter and non-contact infrared-controlled operation.

Technical Data

Model number ULTRONIC Premium ULTRONIC Plus
Rated output 720 W 720 W
Electrical connection 1/N/PE ~ 220-240 V 1/N/PE ~ 220-240 V
Current 3.1 A 3.1 A
Operation Touch free automatic Touch free automatic
Colour Stainless Steel Signal white, RAL 9003
IP Rating IP X3 IP X3
Operating noise 76 dB(A) at 1 metre 76 dB(A) at 1 metre
Operating noise (silent mode) 68 dB(A) at 1 metre 68 dB(A) at 1 metre
Air flow rate 84 m3/h 84 m3/h
Air speed 96 m/s 96 m/s
Runtime (hand drying) 12 seconds 12 seconds
Height 309mm 309mm
Width 272mm 272mm
Depth 132mm 132mm
Weight 4kg 2.8kg

Downloads

File Category Type Download
Ultronic Plus DatasheetData SheetPDF
952.36 kB
Ultronic Premium DatasheetData SheetPDF
740.04 kB
Ultronic Operation & Installation GuideOperation and Installation GuidePDF
3.99 MB
Hand Dryers WarrantyWarrantyPDF
260.99 kB

FAQ

What colours are available for the Ultronic hand dryer?

There are 2 colours available. The Ultronic Premium has a stainless steel case and the UItronic Plus has a white case.

How often should the HEPA filter be changed?

A built-in filter must be replaced after 60, 000 applications. The appliance can still be operated but without the effectiveness of a HEPA filter. After approx. 750 000 applications, the LED on the front of the appliance flashes red. The appliance cannot be operated again until a new filter is inserted.

Ask Quick Question